Kaitek Engineering

Specifications:

1. Conforms to 32-bit PC Card CardBus Standard.

2. Four layers board with power and ground plane.

3. Card size (H X W): 7.300" X 3.500"

4. Board thickness: 0.062"

1. Plugs into 3.3V PC Card Cardbus system slot.

2. Accepts Type I, II, and III PC Cards operating at 3.3V or 5V.

3. All signals are available for probing or connecting to logic analyzer to support testing and debugging.

4. All signal names are clearly marked next to test posts.

5. Vcc, Vpp1 and Vpp2 are jumper connect/disconnect which allows power measurement oc PC Card.

6. External power for Vcc, Vpp1 and Vpp2 can be applied to PC Card.

7. Overcurrent protection for PC Card Vcc.

8. Card Detect Signals (CCD1#, CCD2#) are jumper connect/disconnect to simulate PC Card insertion or removal.

9. Prototype card that does not meet the form factor can be connected to system for testng.

10. Reduces system wear and tear during testing and debugging stage.

Availability: Stock

Ordering Information: PC Card CardBus Extender..........Part Number:33-11-00

Back to Kaitek Engineering Home Page